#
# This test is based on tests from ALISQL test suite
#

--source include/have_binlog_format_row.inc
--source include/master-slave.inc
--source include/have_innodb.inc

--disable_ps2_protocol
connection master;
create database s_db;
grant all on s_db.* to normal_1@'%' identified by 'pass';
grant all on test.* to normal_2@'%' identified by 'pass';
grant all on s_db.* to normal_3@'%' identified by 'pass';
grant all on test.* to normal_4@'%' identified by 'pass';
grant select on test.* to normal_5@'%' identified by 'pass';
flush status;

--sync_slave_with_master

connect(m_normal_1, 127.0.0.1, normal_1, pass, s_db, $MASTER_MYPORT);
connect(m_normal_2, 127.0.0.1, normal_2, pass, test, $MASTER_MYPORT);
connect(m_normal_3, 127.0.0.1, normal_5, pass, test, $MASTER_MYPORT);

connect(s_normal_3, 127.0.0.1, normal_3, pass, s_db, $SLAVE_MYPORT);
connect(s_normal_4, 127.0.0.1, normal_4, pass, test, $SLAVE_MYPORT);

connection slave;
set global read_only=on;

--echo ###########################################
--echo master and slave sync sequence.
--echo ###########################################
connection master;
use s_db;

create sequence s1;
show create table s1;

--sync_slave_with_master
use s_db;
show create table s1;

connection master;
use s_db;

drop sequence s1;

--echo ###########################################
--echo not support create table engine=sequence.
--echo ###########################################
connection master;

--error ER_UNKNOWN_STORAGE_ENGINE
create table t(id int)engine=sequence;

create table t(id int)engine=innodb;

--error ER_UNKNOWN_STORAGE_ENGINE
alter table t engine=sequence;

drop table t;
--echo ###########################################
--echo not support alter sequence table.
--echo ###########################################
connection master;

create sequence s2;

--error ER_SEQUENCE_INVALID_TABLE_STRUCTURE
alter table s2 add id int;

--error ER_SEQUENCE_INVALID_TABLE_STRUCTURE
alter table s2 add index ind_x(start_value);
drop sequence s2;

--echo ###########################################
--echo Support create temporary sequence.
--echo ###########################################
connection master;

create temporary sequence s2;
drop temporary sequence s2;

--echo ###########################################
--echo all invalid sequence value
--echo ###########################################

connection master;
use s_db;
create sequence s2 start with 1
  minvalue 1
  maxvalue 100000
  increment by 1
  cache 10000
  cycle;
drop sequence s2;
create sequence s2 start with 1
  minvalue 1
  maxvalue 100000
  increment by 1
  cache 10000
  nocycle;
drop sequence s2;
create sequence s2 start with 1
  minvalue 1
  maxvalue 100000
  increment by 1
  nocache
  nocycle;
drop sequence s2;

--error ER_SEQUENCE_INVALID_DATA
create sequence s2 start with 1
  minvalue 5
  maxvalue 100000
  increment by 1
  nocache
  nocycle;

--error ER_SEQUENCE_INVALID_DATA
create sequence s2 start with 1
  minvalue 5
  maxvalue 5
  increment by 1
  nocache
  nocycle;

--error ER_SEQUENCE_INVALID_DATA
create sequence s2 start with 1
  minvalue 5
  maxvalue 4
  increment by 1
  nocache
  nocycle;

--error ER_SEQUENCE_INVALID_DATA
create sequence s2 start with 1
  minvalue 5
  maxvalue 4
  increment by 0
  nocache
  nocycle;

--echo ###########################################
--echo global read lock prevent query sequence
--echo ###########################################
connection master;
use s_db;
create sequence s_db.s1;
flush table with read lock;
--error ER_CANT_UPDATE_WITH_READLOCK
select next value for s1;

unlock tables;

drop sequence s_db.s1;

--echo ###########################################
--echo query cache test
--echo ###########################################
connection master;
use s_db;
show global variables like 'query_cache_type';

show status like 'Qcache_hits';
show status like 'Qcache_inserts';

--echo ###########################################
--echo priv test
--echo ###########################################
connection m_normal_1;
create sequence s_db.s1;
select * from s_db.s1;
select next value for s_db.s1;
select * from s_db.s1;
create sequence s_db.s2;
drop sequence s_db.s2;


connection m_normal_2;
--error ER_TABLEACCESS_DENIED_ERROR
select next value for s_db.s1;
--error ER_TABLEACCESS_DENIED_ERROR
create sequence s_db.s2;

connection m_normal_1;
drop sequence s_db.s1;

--echo ###########################################
--echo run out sequence value
--echo ###########################################
connection m_normal_1;
use s_db;
create sequence s_t start with 1 cache 2 maxvalue 5;
create table t(id int);
insert into t values(1111);
insert into t select next value for s_t;
insert into t select next value for s_t;
insert into t select next value for s_t;
insert into t select next value for s_t;
insert into t select next value for s_t;
--error ER_SEQUENCE_RUN_OUT
insert into t select next value for s_t;
--error ER_SEQUENCE_RUN_OUT
insert into t select next value for s_t;
commit;
select * from t;

connection master;
--sync_slave_with_master

connection s_normal_3;
use s_db;
select * from t;

connection m_normal_1;
use s_db;
drop sequence s_t;
drop table t;

--echo ###########################################
--echo read_only prevent query sequence
--echo ###########################################
connection m_normal_1;
create sequence s_db.s1;
show global variables like 'read_only';
select next value for s_db.s1;

connection master;
sync_slave_with_master;

connection s_normal_3;
show global variables like 'read_only';
--error ER_OPTION_PREVENTS_STATEMENT
select next value for s_db.s1;

connection m_normal_1;
drop sequence s_db.s1;

--echo ###########################################
--echo update based table
--echo ###########################################
connection m_normal_1;
use s_db;
create sequence s_t start with 1 minvalue 1 maxvalue 20 increment by 1 cache 5 cycle;

connection master;
--sync_slave_with_master

connection s_normal_3;
use s_db;
select * from s_t;

connection m_normal_1;
select next value for s_t;
select * from s_t;

connection master;
--sync_slave_with_master

connection s_normal_3;
select * from s_t;

--echo ------------------------------------------
--echo master update nextval;
--echo ------------------------------------------
connection m_normal_1;
select next value for s_t;
--error ER_ILLEGAL_HA
update s_t set next_not_cached_value= 11;
alter sequence s_t restart=11;
commit;

select * from s_t;

connection master;
--sync_slave_with_master

--echo ------------------------------------------
--echo show slave nextval;
--echo ------------------------------------------
connection s_normal_3;
select * from s_t;

connection m_normal_1;
select next value for s_t;
select * from s_t;

connection master;
--sync_slave_with_master

connection s_normal_3;
select * from s_t;


--echo ------------------------------------------
--echo update into invalid sequence
--echo ------------------------------------------
connection m_normal_1;
select * from s_t;
--error ER_ILLEGAL_HA
update s_t set next_not_cached_value= 11,start_value=10, minimum_value=11;
--error ER_SEQUENCE_INVALID_DATA
ALTER SEQUENCE s_t restart with 11 start=10 minvalue=11;
commit;

create table t_1(id int);
insert into t_1 value(1111);
select next value for s_t;
insert into t_1 select next value for s_t;
commit;

select * from t_1;

--echo ------------------------------------------
--echo delete sequence row
--echo ------------------------------------------
connection m_normal_1;
--error ER_ILLEGAL_HA
delete from s_t;
commit;

select next value for s_t;

connection m_normal_1;
drop sequence s_t;
drop table t_1;

--echo ###########################################
--echo test transaction context (innodb)
--echo ###########################################

--echo ------------------------------------------
--echo transaction table and sequence
--echo normal transaction commit
--echo ------------------------------------------
connection m_normal_1;
use s_db;
create sequence s_1 cache 5;

create table t_1(id int)engine=innodb;
begin;
insert into t_1 values(1111);
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 values(2222);
commit;

select * from t_1;

connection master;
--sync_slave_with_master

connection s_normal_3;
use s_db;
select * from t_1;

--echo ------------------------------------------
--echo normal transaction rollback
--echo ------------------------------------------
connection m_normal_1;
begin;
insert into t_1 values(3333);
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;

select * from t_1;
rollback;

select * from t_1;
select next value for s_1;

connection master;
--sync_slave_with_master

connection s_normal_3;
use s_db;
select * from t_1;

connection m_normal_1;
use s_db;
drop sequence s_1;
drop table t_1;

--echo ###########################################
--echo test transaction context (myisam)
--echo ###########################################

--echo ------------------------------------------
--echo transaction table and sequence
--echo normal transaction commit
--echo ------------------------------------------
connection m_normal_1;
use s_db;
create sequence s_1 cache 5;

create table t_1(id int)engine=myisam;
begin;
insert into t_1 values(1111);
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 values(2222);
commit;

select * from t_1;

connection master;
--sync_slave_with_master

connection s_normal_3;
use s_db;
select * from t_1;

--echo ------------------------------------------
--echo normal transaction rollback
--echo ------------------------------------------
connection m_normal_1;
begin;
insert into t_1 values(3333);
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;
insert into t_1 select next value for s_1;

select * from t_1;
rollback;

select * from t_1;
select next value for s_1;

connection master;
--sync_slave_with_master

connection s_normal_3;
use s_db;
select * from t_1;

connection m_normal_1;
use s_db;
drop sequence s_1;
drop table t_1;

--echo ###########################################
--echo close binlog
--echo ###########################################
connection m_normal_1;
use s_db;
create sequence s1 cache 2;
select next value for s1;
select next value for s1;
select next value for s1;
select next value for s1;

commit;
select * from s1;

connection master;
--sync_slave_with_master

connection slave;
use s_db;
select * from s1;

--echo ------------------------------------------
--echo close session binlog.
--echo ------------------------------------------
connection master;
set session sql_log_bin=off;
select next value for s1;
select next value for s1;
select next value for s1;
select next value for s1;

set session sql_log_bin=on;
select * from s1;

connection master;
--sync_slave_with_master

connection slave;
use s_db;
select * from s1;

connection m_normal_1;
use s_db;
drop sequence s1;

--echo ###########################################
--echo statement binlog
--echo ###########################################
--echo ------------------------------------------
--echo set binlog_format=statement
--echo ------------------------------------------
connection master;
set session binlog_format=statement;
select @@session.binlog_format;
create sequence s1 cache 2;
--error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
select next value for s1;

set session binlog_format=row;
select next value for s1;
select * from s1;

connection master;
--sync_slave_with_master

use s_db;
select * from s1;

connection m_normal_1;
use s_db;
drop sequence s1;

--echo ###########################################
--echo test savepoint
--echo ###########################################
connection master;
set session binlog_format=row;

create sequence s1 cache 2;
create table t1(id int)engine=innodb;

begin;
insert into t1 values(1111);
savepoint sp1;
insert into t1 select next value for s1;
insert into t1 select next value for s1;
insert into t1 select next value for s1;

insert into t1 values(2222);

select * from t1;
rollback to sp1;
select * from t1;
select next value for s1;

commit;

drop sequence s1;
drop table t1;

--echo ###########################################
--echo test proc
--echo ###########################################
connection m_normal_1;
use s_db;
create table t(id int)engine=innodb;

delimiter //;

create procedure p1()
begin
  create sequence s1 cache 2;
end//

create procedure p2()
begin
  insert into t select next value for s1;
  commit;
end//

delimiter  ;//

call p1();
call p2();
call p2();
call p2();
call p2();

select * from t;

connection master;
--sync_slave_with_master

use s_db;
select * from t;

connection m_normal_1;
drop table t;
drop sequence s1;
drop procedure p1;
drop procedure p2;

--echo ###########################################
--echo test trigger
--echo ###########################################
connection m_normal_1;
use s_db;
create sequence s1 cache 2;
create table t1(id int)engine=innodb;
create table t2(id int)engine=innodb;

delimiter //;
CREATE TRIGGER tri_1
  before INSERT ON t2 FOR EACH ROW
BEGIN
  INSERT INTO t1 select next value for s1;
END//
delimiter  ;//

begin;
insert into t2 values(1111);
insert into t2 values(1111);
insert into t2 values(1111);
insert into t2 values(1111);

select * from t2;
select * from t1;
rollback;
select * from t2;
select * from t1;

select next value for s1;


drop trigger tri_1;
drop table t1;
drop table t2;
drop sequence s1;

--echo ###########################################
--echo test function
--echo ###########################################
connection m_normal_1;
use s_db;
create sequence s1 cache 2;
create table t1(id int)engine=innodb;

delimiter //;
CREATE function f1() returns int
BEGIN
  INSERT INTO t1 select next value for s1;
  return (1);
END//
delimiter  ;//

begin;
select f1();
select f1();
select f1();
select f1();

select * from t1;
rollback;
select * from t1;

select next value for s1;

drop function f1;
drop table t1;
drop sequence s1;

--echo ##############
--echo Test GRANT
--echo ##############

connection m_normal_2;
create table t1 (a int);
create sequence s1;
select next value for s1;
insert into t1 values (1);
connection m_normal_3;
select * from t1;
select * from s1;
select previous value for s1;
--error ER_TABLEACCESS_DENIED_ERROR
insert into t1 values (2);
--error ER_TABLEACCESS_DENIED_ERROR
select next value for s1;
--error ER_TABLEACCESS_DENIED_ERROR
do setval(s1,1000,0);
connection master;
grant insert on test.* to normal_5@'%' identified by 'pass';
disconnect m_normal_3;
connect(m_normal_3, 127.0.0.1, normal_5, pass, test, $MASTER_MYPORT);
insert into t1 values (2);
select t1.*, (next value for s1) from t1;
do setval(s1,10000,0);
select * from s1;
connection m_normal_2;
drop table t1;
drop sequence s1;

--echo #
--echo # Cleanup
--echo #

connection master;
use s_db;
drop database s_db;
drop user normal_1@'%';
drop user normal_2@'%';
drop user normal_3@'%';
drop user normal_4@'%';
drop user normal_5@'%';
--enable_ps2_protocol

--source include/rpl_end.inc