include/master-slave.inc
[connection master]
#
# Slave default configuration should be Slave_Pos
connection slave;
#
# Ensure that a slave configured with Using_Gtid=Slave_Pos will remain
# as Slave_Pos after RESET SLAVE
include/stop_slave.inc
RESET SLAVE;
# No warning should be given because Slave_Pos never changed
SHOW WARNINGS;
Level	Code	Message
include/start_slave.inc
#
# Ensure that a slave configured with Using_Gtid=No will revert to its
# default of Slave_Pos after RESET SLAVE for a master which supports
# GTIDs
include/stop_slave.inc
CHANGE MASTER TO MASTER_USE_GTID=NO;
include/start_slave.inc
include/stop_slave.inc
RESET SLAVE;
Warnings:
Note	4190	RESET SLAVE is implicitly changing the value of 'Using_Gtid' from 'No' to 'Slave_Pos'
# A notification that Using_Gtid was reverted should exist
SHOW WARNINGS;
Level	Code	Message
Note	4190	RESET SLAVE is implicitly changing the value of 'Using_Gtid' from 'No' to 'Slave_Pos'
include/start_slave.inc
# Clear SHOW WARNINGS
#
# If the primary does not support GTIDs (version < 10), the replica
# should fall back to Using_Gtid=No on slave start, and should not
# revert Using_Gtid to Slave_Pos after RESET SLAVE
include/stop_slave.inc
RESET SLAVE ALL;
CHANGE MASTER TO MASTER_HOST='127.0.0.1', MASTER_PORT=MASTER_MYPORT, MASTER_USER='root', MASTER_CONNECT_RETRY=1;
SET @saved_dbug= @@GLOBAL.debug_dbug;
set @@global.debug_dbug= "d,mock_mariadb_primary_v5_in_get_master_version";
include/start_slave.inc
# Replica should detect at start that the primary does not support GTIDs
# and fall-back to Using_Gtid=No
# Replica should have an informational message stating it is falling
# back to Using_Gtid=No
FOUND 1 /Falling back to Using_Gtid=No because master does not support GTIDs/ in mysqld.2.err
include/stop_slave.inc
RESET SLAVE;
# Replica should know that the primary does not support GTIDs and
# preserve Using_Gtid=No
# 'No' was not reverted and therefore no note should be added
SHOW WARNINGS;
Level	Code	Message
set @@global.debug_dbug= @saved_dbug;
include/start_slave.inc
#
# Ensure that a slave configured with Using_Gtid=Current_Pos will revert
# to its default of Slave_Pos after RESET SLAVE.
include/stop_slave.inc
CHANGE MASTER TO MASTER_USE_GTID=Current_Pos;
include/start_slave.inc
include/stop_slave.inc
RESET SLAVE;
Warnings:
Note	4190	RESET SLAVE is implicitly changing the value of 'Using_Gtid' from 'Current_Pos' to 'Slave_Pos'
# A notification that Using_Gtid was reverted should exist
SHOW WARNINGS;
Level	Code	Message
Note	4190	RESET SLAVE is implicitly changing the value of 'Using_Gtid' from 'Current_Pos' to 'Slave_Pos'
include/start_slave.inc
# Clear SHOW WARNINGS
# The MTR include file rpl_change_topology.inc should implicitly set
# MASTER_USE_GTID=NO when provided with $rpl_master_log_file. Note that
# this will switch master and slave roles.
connection slave;
include/stop_slave.inc
include/rpl_change_topology.inc [new topology=2->1]
# connection 'master' is the slave in this comparison
connection master;
# Validating Using_Gtid=No..
# ..success
include/rpl_change_topology.inc [new topology=1->2]
# connection 'slave' is back to slave role
connection slave;
# Validating Using_Gtid=Slave_Pos..
# ..success
include/start_slave.inc
#
# The MTR include file reset_slave.inc should keep/delete GTID state
# when reset_slave_keep_gtid_state is set, respectively.
#
connection master;
CREATE TABLE t1 (a INT);
INSERT INTO t1 VALUES (1);
DROP TABLE t1;
include/save_master_gtid.inc
connection slave;
include/sync_with_master_gtid.inc
include/stop_slave.inc
# Tagging gtid_slave_pos before reset_slave.inc as old_slave_pos
# Using reset_slave_keep_gtid_state=1 should preserve GTID state
include/reset_slave.inc
# Tagging gtid_slave_pos after reset_slave.inc as new_slave_pos
# Validating old_slave_pos == new_slave_pos..
# ..success
# Using reset_slave_keep_gtid_state=0 should empty GTID state
include/reset_slave.inc
# Tagging gtid_slave_pos as new_slave_pos
# Validating new_slave_pos is empty..
# ..success
set global gtid_slave_pos="old_slave_pos";
include/start_slave.inc
#
# A replica issued CHANGE MASTER TO specified with log coordinates but
# not master_use_gtid=no should warn the user that Using_Gtid is being
# changed to No.
#
connection master;
include/save_master_pos.inc
connection slave;
include/sync_io_with_master.inc
include/stop_slave.inc
CHANGE MASTER TO master_log_pos=io_log_pos, master_log_file='io_log_file';
Warnings:
Note	4190	CHANGE MASTER TO is implicitly changing the value of 'Using_Gtid' from 'Slave_Pos' to 'No'
include/start_slave.inc
#
# A replica issued CHANGE MASTER TO specified with log coordinates and
# master_use_gtid=Slave_Pos should warn the user that the log
# coordinates will be ignored.
#
connection slave;
include/stop_slave.inc
CHANGE MASTER TO master_log_pos=io_log_pos, master_log_file='io_log_file', master_use_gtid=Slave_Pos;
Warnings:
Note	1618	<MASTER_LOG_FILE> option ignored
Note	1618	<MASTER_LOG_POS> option ignored
CHANGE MASTER TO relay_log_pos=relay_log_pos, relay_log_file='relay_log_file', master_use_gtid=Slave_Pos;
Warnings:
Note	1618	<RELAY_LOG_FILE> option ignored
Note	1618	<RELAY_LOG_POS> option ignored
include/start_slave.inc
include/rpl_end.inc
#
# End of rpl_using_gtid_default.test