drop table if exists t0, t1, t2, t3, t4;
drop view if exists v1;
SET @old_debug= @@session.debug;
set debug_sync='RESET';
create table t0 (a int);
insert into t0 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
create table t1 (a int);
alter table t1 add b int, add c int, add filler char(32);
insert into t1 select A.a, 10*B.a, 100*C.a, 'foo filler' from t0 A, t0 B, t0 C;
alter table t1 add key(a), add key(b);
analyze table t1;
Table	Op	Msg_type	Msg_text
test.t1	analyze	status	Engine-independent statistics collected
test.t1	analyze	status	Table is already up to date
show analyze format=JSON for;
ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '' at line 1
show analyze format=json for 1001;
ERROR HY000: Unknown thread id: 1001
show analyze format=JSON for (select a from t0 limit 1);
ERROR HY000: You may only use constant expressions in this statement
connect  con1, localhost, root,,;
connection con1;
SET @old_debug= @@session.debug;
connection default;
show analyze format = JSON for $thr2;
ERROR HY000: Target is not executing an operation with a query plan
show analyze format = json for $thr1;
ERROR HY000: Target is not executing an operation with a query plan
show analyze FORMAT=HTML for $thr1;
ERROR HY000: Unknown EXPLAIN/ANALYZE format name: 'HTML'
analyze FORMAT=XML for connection $thr1;
ERROR HY000: Unknown EXPLAIN/ANALYZE format name: 'XML'
connection con1;
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
select count(*) from t1 where c < 500;
connection default;
show analyze format=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "t1",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 1000,
          "r_rows": 1000,
          "filtered": 50,
          "r_filtered": 50,
          "attached_condition": "t1.c < 500"
        }
      }
    ]
  }
}
Warnings:
Note	1003	select count(*) from t1 where c < 500
connection con1;
count(*)
500
select max(c) from t1 where c < 10;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "t1",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 1000,
          "r_rows": 1000,
          "filtered": 10,
          "r_filtered": 10,
          "attached_condition": "t1.c < 10"
        }
      }
    ]
  }
}
Warnings:
Note	1003	select max(c) from t1 where c < 10
connection con1;
max(c)
0
# We can catch ANALYZE too.
analyze select max(c) from t1 where a < 10;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "r_total_time_ms": "REPLACED",
    "nested_loop": [
      {
        "table": {
          "table_name": "t1",
          "access_type": "ALL",
          "possible_keys": ["a"],
          "r_loops": 1,
          "rows": 1000,
          "r_rows": 1000,
          "r_table_time_ms": "REPLACED",
          "r_other_time_ms": "REPLACED",
          "r_engine_stats": REPLACED,
          "filtered": 99.90000153,
          "r_filtered": 100,
          "attached_condition": "t1.a < 10"
        }
      }
    ]
  }
}
Warnings:
Note	1003	analyze select max(c) from t1 where a < 10
connection con1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	r_rows	filtered	r_filtered	Extra
1	SIMPLE	t1	ALL	a	NULL	NULL	NULL	1000	1000.00	99.90	100.00	Using where
SET debug_dbug=@old_debug;
# UNION, select, first branch
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
select max(a) from t0 a where a<=5 union select max(a+1) from t0 b where a>=9;
connection default;
show analyze FORMAT= json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "union_result": {
      "table_name": "<union1,2>",
      "access_type": "ALL",
      "r_loops": 0,
      "r_rows": null,
      "query_specifications": [
        {
          "query_block": {
            "select_id": 1,
            "r_loops": 1,
            "nested_loop": [
              {
                "table": {
                  "table_name": "a",
                  "access_type": "ALL",
                  "r_loops": 1,
                  "rows": 10,
                  "r_rows": 10,
                  "filtered": 100,
                  "r_filtered": 60,
                  "attached_condition": "a.a <= 5"
                }
              }
            ]
          }
        },
        {
          "query_block": {
            "select_id": 2,
            "operation": "UNION",
            "nested_loop": [
              {
                "table": {
                  "table_name": "b",
                  "access_type": "ALL",
                  "r_loops": 0,
                  "rows": 10,
                  "r_rows": null,
                  "filtered": 100,
                  "r_filtered": null,
                  "attached_condition": "b.a >= 9"
                }
              }
            ]
          }
        }
      ]
    }
  }
}
Warnings:
Note	1003	select max(a) from t0 a where a<=5 union select max(a+1) from t0 b where a>=9
connection con1;
max(a)
5
10
# UNION, select, second branch
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
select max(a) from t0 a where a<=5 union select max(a+1) from t0 b where a>=9;
connection default;
show analyze format=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "union_result": {
      "table_name": "<union1,2>",
      "access_type": "ALL",
      "r_loops": 0,
      "r_rows": null,
      "query_specifications": [
        {
          "query_block": {
            "select_id": 1,
            "r_loops": 1,
            "nested_loop": [
              {
                "table": {
                  "table_name": "a",
                  "access_type": "ALL",
                  "r_loops": 1,
                  "rows": 10,
                  "r_rows": 10,
                  "filtered": 100,
                  "r_filtered": 60,
                  "attached_condition": "a.a <= 5"
                }
              }
            ]
          }
        },
        {
          "query_block": {
            "select_id": 2,
            "operation": "UNION",
            "r_loops": 1,
            "nested_loop": [
              {
                "table": {
                  "table_name": "b",
                  "access_type": "ALL",
                  "r_loops": 1,
                  "rows": 10,
                  "r_rows": 10,
                  "filtered": 100,
                  "r_filtered": 10,
                  "attached_condition": "b.a >= 9"
                }
              }
            ]
          }
        }
      ]
    }
  }
}
Warnings:
Note	1003	select max(a) from t0 a where a<=5 union select max(a+1) from t0 b where a>=9
connection con1;
max(a)
5
10
# UNION, analyze, first branch
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
analyze select a from t0 a where a<=5 union select a+1 from t0 b where a>=9;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "union_result": {
      "table_name": "<union1,2>",
      "access_type": "ALL",
      "r_loops": 0,
      "r_rows": null,
      "query_specifications": [
        {
          "query_block": {
            "select_id": 1,
            "r_loops": 1,
            "r_total_time_ms": "REPLACED",
            "nested_loop": [
              {
                "table": {
                  "table_name": "a",
                  "access_type": "ALL",
                  "r_loops": 1,
                  "rows": 10,
                  "r_rows": 10,
                  "r_table_time_ms": "REPLACED",
                  "r_other_time_ms": "REPLACED",
                  "r_engine_stats": REPLACED,
                  "filtered": 100,
                  "r_filtered": 60,
                  "attached_condition": "a.a <= 5"
                }
              }
            ]
          }
        },
        {
          "query_block": {
            "select_id": 2,
            "operation": "UNION",
            "nested_loop": [
              {
                "table": {
                  "table_name": "b",
                  "access_type": "ALL",
                  "r_loops": 0,
                  "rows": 10,
                  "r_rows": null,
                  "r_engine_stats": REPLACED,
                  "filtered": 100,
                  "r_filtered": null,
                  "attached_condition": "b.a >= 9"
                }
              }
            ]
          }
        }
      ]
    }
  }
}
Warnings:
Note	1003	analyze select a from t0 a where a<=5 union select a+1 from t0 b where a>=9
connection con1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	r_rows	filtered	r_filtered	Extra
1	PRIMARY	a	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	60.00	Using where
2	UNION	b	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	10.00	Using where
NULL	UNION RESULT	<union1,2>	ALL	NULL	NULL	NULL	NULL	NULL	7.00	NULL	NULL	
# UNION, analyze, second branch
set @show_explain_probe_select_id=2;
analyze select a from t0 a where a<=5 union select a+1 from t0 b where a>=9;
connection default;
show analyze FORMAT=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "union_result": {
      "table_name": "<union1,2>",
      "access_type": "ALL",
      "r_loops": 0,
      "r_rows": null,
      "query_specifications": [
        {
          "query_block": {
            "select_id": 1,
            "r_loops": 1,
            "r_total_time_ms": "REPLACED",
            "nested_loop": [
              {
                "table": {
                  "table_name": "a",
                  "access_type": "ALL",
                  "r_loops": 1,
                  "rows": 10,
                  "r_rows": 10,
                  "r_table_time_ms": "REPLACED",
                  "r_other_time_ms": "REPLACED",
                  "r_engine_stats": REPLACED,
                  "filtered": 100,
                  "r_filtered": 60,
                  "attached_condition": "a.a <= 5"
                }
              }
            ]
          }
        },
        {
          "query_block": {
            "select_id": 2,
            "operation": "UNION",
            "r_loops": 1,
            "r_total_time_ms": "REPLACED",
            "nested_loop": [
              {
                "table": {
                  "table_name": "b",
                  "access_type": "ALL",
                  "r_loops": 1,
                  "rows": 10,
                  "r_rows": 10,
                  "r_table_time_ms": "REPLACED",
                  "r_other_time_ms": "REPLACED",
                  "r_engine_stats": REPLACED,
                  "filtered": 100,
                  "r_filtered": 10,
                  "attached_condition": "b.a >= 9"
                }
              }
            ]
          }
        }
      ]
    }
  }
}
Warnings:
Note	1003	analyze select a from t0 a where a<=5 union select a+1 from t0 b where a>=9
connection con1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	r_rows	filtered	r_filtered	Extra
1	PRIMARY	a	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	60.00	Using where
2	UNION	b	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	10.00	Using where
NULL	UNION RESULT	<union1,2>	ALL	NULL	NULL	NULL	NULL	NULL	7.00	NULL	NULL	
SET debug_dbug=@old_debug;
# Uncorrelated  subquery, select
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
select a, (select max(a) from t0 b where a>6) from t0 a where a<2;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "a",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 10,
          "r_rows": 10,
          "filtered": 100,
          "r_filtered": 20,
          "attached_condition": "a.a < 2"
        }
      }
    ],
    "subqueries": [
      {
        "query_block": {
          "select_id": 2,
          "r_loops": 1,
          "nested_loop": [
            {
              "table": {
                "table_name": "b",
                "access_type": "ALL",
                "r_loops": 1,
                "rows": 10,
                "r_rows": 10,
                "filtered": 100,
                "r_filtered": 30,
                "attached_condition": "b.a > 6"
              }
            }
          ]
        }
      }
    ]
  }
}
Warnings:
Note	1003	select a, (select max(a) from t0 b where a>6) from t0 a where a<2
connection con1;
a	(select max(a) from t0 b where a>6)
0	9
1	9
SET debug_dbug=@old_debug;
# Uncorrelated  subquery, analyze
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
analyze select a, (select max(a) from t0 b where a>6) from t0 a where a<2;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "r_total_time_ms": "REPLACED",
    "nested_loop": [
      {
        "table": {
          "table_name": "a",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 10,
          "r_rows": 10,
          "r_table_time_ms": "REPLACED",
          "r_other_time_ms": "REPLACED",
          "r_engine_stats": REPLACED,
          "filtered": 100,
          "r_filtered": 20,
          "attached_condition": "a.a < 2"
        }
      }
    ],
    "subqueries": [
      {
        "query_block": {
          "select_id": 2,
          "r_loops": 1,
          "r_total_time_ms": "REPLACED",
          "nested_loop": [
            {
              "table": {
                "table_name": "b",
                "access_type": "ALL",
                "r_loops": 1,
                "rows": 10,
                "r_rows": 10,
                "r_table_time_ms": "REPLACED",
                "r_other_time_ms": "REPLACED",
                "r_engine_stats": REPLACED,
                "filtered": 100,
                "r_filtered": 30,
                "attached_condition": "b.a > 6"
              }
            }
          ]
        }
      }
    ]
  }
}
Warnings:
Note	1003	analyze select a, (select max(a) from t0 b where a>6) from t0 a where a<2
connection con1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	r_rows	filtered	r_filtered	Extra
1	PRIMARY	a	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	20.00	Using where
2	SUBQUERY	b	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	30.00	Using where
SET debug_dbug=@old_debug;
# correlated subquery, select, before execution start
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<2;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "a",
          "access_type": "ALL",
          "r_loops": 0,
          "rows": 10,
          "r_rows": null,
          "filtered": 100,
          "r_filtered": null,
          "attached_condition": "a.a < 2"
        }
      }
    ],
    "subqueries": [
      {
        "expression_cache": {
          "state": "uninitialized",
          "r_loops": 0,
          "query_block": {
            "select_id": 2,
            "nested_loop": [
              {
                "table": {
                  "table_name": "b",
                  "access_type": "ALL",
                  "r_loops": 0,
                  "rows": 10,
                  "r_rows": null,
                  "filtered": 100,
                  "r_filtered": null,
                  "attached_condition": "b.a + a.a < 10"
                }
              }
            ]
          }
        }
      }
    ]
  }
}
Warnings:
Note	1003	select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<2
connection con1;
a	(select max(a) from t0 b where b.a+a.a<10)
0	9
1	8
SET debug_dbug=@old_debug;
# correlated subquery, select, after execution
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<2;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "a",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 10,
          "r_rows": 10,
          "filtered": 100,
          "r_filtered": 20,
          "attached_condition": "a.a < 2"
        }
      }
    ],
    "subqueries": [
      {
        "expression_cache": {
          "r_loops": 2,
          "r_hit_ratio": 0,
          "query_block": {
            "select_id": 2,
            "r_loops": 2,
            "nested_loop": [
              {
                "table": {
                  "table_name": "b",
                  "access_type": "ALL",
                  "r_loops": 2,
                  "rows": 10,
                  "r_rows": 10,
                  "filtered": 100,
                  "r_filtered": 95,
                  "attached_condition": "b.a + a.a < 10"
                }
              }
            ]
          }
        }
      }
    ]
  }
}
Warnings:
Note	1003	select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<2
connection con1;
a	(select max(a) from t0 b where b.a+a.a<10)
0	9
1	8
SET debug_dbug=@old_debug;
# correlated subquery, analyze
set @show_explain_probe_select_id=1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
analyze select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<2;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "r_total_time_ms": "REPLACED",
    "nested_loop": [
      {
        "table": {
          "table_name": "a",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 10,
          "r_rows": 10,
          "r_table_time_ms": "REPLACED",
          "r_other_time_ms": "REPLACED",
          "r_engine_stats": REPLACED,
          "filtered": 100,
          "r_filtered": 20,
          "attached_condition": "a.a < 2"
        }
      }
    ],
    "subqueries": [
      {
        "expression_cache": {
          "r_loops": 2,
          "r_hit_ratio": 0,
          "query_block": {
            "select_id": 2,
            "r_loops": 2,
            "r_total_time_ms": "REPLACED",
            "nested_loop": [
              {
                "table": {
                  "table_name": "b",
                  "access_type": "ALL",
                  "r_loops": 2,
                  "rows": 10,
                  "r_rows": 10,
                  "r_table_time_ms": "REPLACED",
                  "r_other_time_ms": "REPLACED",
                  "r_engine_stats": REPLACED,
                  "filtered": 100,
                  "r_filtered": 95,
                  "attached_condition": "b.a + a.a < 10"
                }
              }
            ]
          }
        }
      }
    ]
  }
}
Warnings:
Note	1003	analyze select a, (select max(a) from t0 b where b.a+a.a<10) from t0 a where a<2
connection con1;
id	select_type	table	type	possible_keys	key	key_len	ref	rows	r_rows	filtered	r_filtered	Extra
1	PRIMARY	a	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	20.00	Using where
2	DEPENDENT SUBQUERY	b	ALL	NULL	NULL	NULL	NULL	10	10.00	100.00	95.00	Using where
SET debug_dbug=@old_debug;
# Try to do SHOW ANALYZE for a query that runs a  SET command:
#
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
set @foo= (select max(a) from t0 where sin(a) >0);
connection default;
show analyze format=json for $thr2;
ERROR HY000: Target is not executing an operation with a query plan
kill query $thr2;
connection con1;
ERROR 70100: Query execution was interrupted
SET debug_dbug=@old_debug;
#
# Attempt SHOW ANALYZE for an UPDATE
#
create table t2 as select a as a, a as dummy from t0 limit 2;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
update t2 set dummy=0 where (select max(a) from t0 where t2.a + t0.a <3) >3 ;
connection default;
show analyze FORMAT=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "table": {
      "update": 1,
      "table_name": "t2",
      "access_type": "ALL",
      "rows": 2,
      "r_rows": 1,
      "r_filtered": 0,
      "attached_condition": "(subquery#2) > 3"
    },
    "subqueries": [
      {
        "query_block": {
          "select_id": 2,
          "nested_loop": [
            {
              "table": {
                "table_name": "t0",
                "access_type": "ALL",
                "r_loops": 0,
                "rows": 10,
                "r_rows": null,
                "filtered": 100,
                "r_filtered": null,
                "attached_condition": "t2.a + t0.a < 3"
              }
            }
          ]
        }
      }
    ]
  }
}
Warnings:
Note	1003	update t2 set dummy=0 where (select max(a) from t0 where t2.a + t0.a <3) >3
show analyze FORMAT=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "table": {
      "update": 1,
      "table_name": "t2",
      "access_type": "ALL",
      "rows": 2,
      "r_rows": 2,
      "r_filtered": 0,
      "attached_condition": "(subquery#2) > 3"
    },
    "subqueries": [
      {
        "query_block": {
          "select_id": 2,
          "r_loops": 1,
          "nested_loop": [
            {
              "table": {
                "table_name": "t0",
                "access_type": "ALL",
                "r_loops": 1,
                "rows": 10,
                "r_rows": 10,
                "filtered": 100,
                "r_filtered": 30,
                "attached_condition": "t2.a + t0.a < 3"
              }
            }
          ]
        }
      }
    ]
  }
}
Warnings:
Note	1003	update t2 set dummy=0 where (select max(a) from t0 where t2.a + t0.a <3) >3
connection con1;
drop table t2;
SET debug_dbug=@old_debug;
#
# Attempt SHOW ANALYZE for a DELETE
#
create table t2 as select a as a, a as dummy from t0 limit 2;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
delete from t2 where (select max(a) from t0 where t2.a + t0.a <3) >3 ;
connection default;
show analyze FORMAT=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "table": {
      "delete": 1,
      "table_name": "t2",
      "access_type": "ALL",
      "rows": 2,
      "r_rows": 1,
      "r_filtered": 0,
      "attached_condition": "(subquery#2) > 3"
    },
    "subqueries": [
      {
        "query_block": {
          "select_id": 2,
          "nested_loop": [
            {
              "table": {
                "table_name": "t0",
                "access_type": "ALL",
                "r_loops": 0,
                "rows": 10,
                "r_rows": null,
                "filtered": 100,
                "r_filtered": null,
                "attached_condition": "t2.a + t0.a < 3"
              }
            }
          ]
        }
      }
    ]
  }
}
Warnings:
Note	1003	delete from t2 where (select max(a) from t0 where t2.a + t0.a <3) >3
show analyze FORMAT=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "table": {
      "delete": 1,
      "table_name": "t2",
      "access_type": "ALL",
      "rows": 2,
      "r_rows": 2,
      "r_filtered": 0,
      "attached_condition": "(subquery#2) > 3"
    },
    "subqueries": [
      {
        "query_block": {
          "select_id": 2,
          "r_loops": 1,
          "nested_loop": [
            {
              "table": {
                "table_name": "t0",
                "access_type": "ALL",
                "r_loops": 1,
                "rows": 10,
                "r_rows": 10,
                "filtered": 100,
                "r_filtered": 30,
                "attached_condition": "t2.a + t0.a < 3"
              }
            }
          ]
        }
      }
    ]
  }
}
Warnings:
Note	1003	delete from t2 where (select max(a) from t0 where t2.a + t0.a <3) >3
connection con1;
drop table t2;
SET debug_dbug=@old_debug;
#
# Multiple SHOW ANALYZE calls for one select
#
create table t2 as select a as a, a as dummy from t0 limit 3;
set @show_explain_probe_select_id=2;
SET debug_dbug='+d,show_explain_probe_join_exec_start';
select t2.a, ((select max(a) from t0 where t2.a + t0.a <3) >3) as SUBQ from t2;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "t2",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 3,
          "r_rows": 1,
          "filtered": 100,
          "r_filtered": 100
        }
      }
    ],
    "subqueries": [
      {
        "expression_cache": {
          "r_loops": 1,
          "r_hit_ratio": 0,
          "query_block": {
            "select_id": 2,
            "nested_loop": [
              {
                "table": {
                  "table_name": "t0",
                  "access_type": "ALL",
                  "r_loops": 0,
                  "rows": 10,
                  "r_rows": null,
                  "filtered": 100,
                  "r_filtered": null,
                  "attached_condition": "t2.a + t0.a < 3"
                }
              }
            ]
          }
        }
      }
    ]
  }
}
Warnings:
Note	1003	select t2.a, ((select max(a) from t0 where t2.a + t0.a <3) >3) as SUBQ from t2
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "t2",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 3,
          "r_rows": 2,
          "filtered": 100,
          "r_filtered": 100
        }
      }
    ],
    "subqueries": [
      {
        "expression_cache": {
          "r_loops": 2,
          "r_hit_ratio": 0,
          "query_block": {
            "select_id": 2,
            "r_loops": 1,
            "nested_loop": [
              {
                "table": {
                  "table_name": "t0",
                  "access_type": "ALL",
                  "r_loops": 1,
                  "rows": 10,
                  "r_rows": 10,
                  "filtered": 100,
                  "r_filtered": 30,
                  "attached_condition": "t2.a + t0.a < 3"
                }
              }
            ]
          }
        }
      }
    ]
  }
}
Warnings:
Note	1003	select t2.a, ((select max(a) from t0 where t2.a + t0.a <3) >3) as SUBQ from t2
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "table": {
          "table_name": "t2",
          "access_type": "ALL",
          "r_loops": 1,
          "rows": 3,
          "r_rows": 3,
          "filtered": 100,
          "r_filtered": 100
        }
      }
    ],
    "subqueries": [
      {
        "expression_cache": {
          "r_loops": 3,
          "r_hit_ratio": 0,
          "query_block": {
            "select_id": 2,
            "r_loops": 2,
            "nested_loop": [
              {
                "table": {
                  "table_name": "t0",
                  "access_type": "ALL",
                  "r_loops": 2,
                  "rows": 10,
                  "r_rows": 10,
                  "filtered": 100,
                  "r_filtered": 25,
                  "attached_condition": "t2.a + t0.a < 3"
                }
              }
            ]
          }
        }
      }
    ]
  }
}
Warnings:
Note	1003	select t2.a, ((select max(a) from t0 where t2.a + t0.a <3) >3) as SUBQ from t2
connection con1;
a	SUBQ
0	0
1	0
2	0
SET debug_dbug=@old_debug;
drop table t2;
#
# SHOW ANALYZE for SELECT ... ORDER BY with "Using filesort"
#
SET debug_dbug='+d,show_explain_probe_join_exec_end';
set @show_explain_probe_select_id=1;
select * from t0 order by a;
connection default;
show analyze format=JSON for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "nested_loop": [
      {
        "read_sorted_file": {
          "r_rows": 10,
          "filesort": {
            "sort_key": "t0.a",
            "r_loops": 1,
            "r_used_priority_queue": false,
            "r_output_rows": 10,
            "r_buffer_size": "REPLACED",
            "r_sort_mode": "sort_key,addon_fields",
            "table": {
              "table_name": "t0",
              "access_type": "ALL",
              "r_loops": 1,
              "rows": 10,
              "r_rows": 10,
              "filtered": 100,
              "r_filtered": 100
            }
          }
        }
      }
    ]
  }
}
Warnings:
Note	1003	select * from t0 order by a
connection con1;
a
0
1
2
3
4
5
6
7
8
9
SET debug_dbug=@old_debug;
#
# SHOW ANALYZE for SELECT ... with "Using temporary"
#
connection con1;
SET debug_dbug='+d,show_explain_probe_join_exec_end';
set @show_explain_probe_select_id=1;
select distinct a from t0;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "temporary_table": {
      "nested_loop": [
        {
          "table": {
            "table_name": "t0",
            "access_type": "ALL",
            "r_loops": 1,
            "rows": 10,
            "r_rows": 10,
            "filtered": 100,
            "r_filtered": 100
          }
        }
      ]
    }
  }
}
Warnings:
Note	1003	select distinct a from t0
connection con1;
a
0
1
2
3
4
5
6
7
8
9
SET debug_dbug=@old_debug;
#
# SHOW ANALYZE for SELECT ... with "Using temporary; Using filesort"
#
SET debug_dbug='+d,show_explain_probe_join_exec_end';
set @show_explain_probe_select_id=1;
select distinct a from t0;
connection default;
show analyze format=json for $thr2;
SHOW ANALYZE
{
  "r_query_time_in_progress_ms": "REPLACED",
  "query_optimization": {
    "r_total_time_ms": "REPLACED"
  },
  "query_block": {
    "select_id": 1,
    "r_loops": 1,
    "temporary_table": {
      "nested_loop": [
        {
          "table": {
            "table_name": "t0",
            "access_type": "ALL",
            "r_loops": 1,
            "rows": 10,
            "r_rows": 10,
            "filtered": 100,
            "r_filtered": 100
          }
        }
      ]
    }
  }
}
Warnings:
Note	1003	select distinct a from t0
connection con1;
a
0
1
2
3
4
5
6
7
8
9
SET debug_dbug=@old_debug;
drop table t0,t1;
#
# MDEV-28124: Server crashes in Explain_aggr_filesort::print_json_members
# upon SHOW ANALYZE/EXPLAIN FORMAT=JSON
#
connection con1;
set @show_explain_probe_query= 'SELECT count(*) - count(*) FROM sys.waits_by_user_by_latency';
set debug_dbug='+d,explain_notify_tables_are_closed';
SELECT count(*) - count(*) FROM sys.waits_by_user_by_latency;
connection default;
SHOW ANALYZE FORMAT=JSON FOR $thr2;
ERROR HY000: Target is not executing an operation with a query plan
connection con1;
count(*) - count(*)
0
# End
connection default;
disconnect con1;
set debug_sync='RESET';